D-Link DAP-1350 Wireless Router Drivers PC

Download Now
D-Link DAP-1350 Wireless Router Driver

D-Link DAP rev A1 Type: wireless router, access point OpenWRT trunk contains support for the DAP, however, the beta. D-LINK DAP Wireless N Pocket Router / Client / Access Point N. Get started using D-Link 's DAP wireless N mobile router to improve your signal strength when on.

D-Link DAP-1350 Wireless Router Drivers PC

Type: Driver
374 (3.3)
Downloads: 456
File Size: 3.46Mb
Supported systems: Windows All
Price: Free* [*Free Registration Required]

Download Now
D-Link DAP-1350 Wireless Router Driver

Use a paper clip or something sharp While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds D-Link DAP-1350 Wireless Router still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

D-Link DAP Wireless N Pocket Router - Computer Parts Store and Vancouver Repair Service

D-Link DAP-1350 Wireless Router This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

The WEP setting can be changed to fit an existing wireless network or to customize your wireless network. Note that, if you enter fewer characters in the WEP key than required, the remainder D-Link DAP-1350 Wireless Router the key is automatically padded with zeros.

Setup Help for the Dlink DAP-1350Router Sceenshot

The WPA Mode further refines the variant that the router should employ. WPA is the older standard; select this option if the clients that will be used with the router only support the older standard.

The encryption algorithm used to secure the data communication. It cannot be shorter than eight characters, although for proper security it needs to be of ample length and should not be a commonly known phrase. This phrase is used to generate session keys that are D-Link DAP-1350 Wireless Router for each wireless client.

D-Link DAP-1350 Wireless Router Treiber Windows 7

Wireless clients should have established the necessary credentials before attempting to authenticate to the Server through this Gateway. The IP address of the authentication server.

The port number used to connect to the authentication server. A pass-phrase that must match with the authentication server. The IP address is also used to access this Web-based management interface.


It is recommended that you use the default settings if you do not have an existing network. Your local area network settings are based on the address assigned here. Subnet Mask The subnet mask of your router on the local area network.

D-Link DAP-1350 Wireless Router Drivers PC

You can enter the device name of the router, instead of IP address, into your web browser to access for configuration. Recommend to change the device name if there's more than one D-Link devices within the subnet. Local Domain Name This entry is optional. Enter a domain name for the local network. So, for example, D-Link DAP-1350 Wireless Router you enter mynetwork.

Gateway The IP address of the router on the local area D-Link DAP-1350 Wireless Router.

D-Link Wireless N Pocket Router / Access Point

There is no need for you D-Link DAP-1350 Wireless Router do this yourself. Any addresses that are outside of this range are not managed by the DHCP Server; these could, therefore, be used for manually configured devices or devices that cannot use DHCP to obtain network address details automatically. It is possible for a computer or device that is manually configured to have an address that does reside within this range. Your D-Link router, by default, has a static IP address of This means that addresses Your D-Link router uses You've assigned a computer that you want to designate as a Web server with a D-Link DAP-1350 Wireless Router IP address of You've assigned another computer that you want to designate as an FTP server with a static IP address of This means that Computers or devices that use addresses from these ranges are to be manually configured.

Suppose you have a web server computer that has a manually configured address of Because this falls within the "managed range" be sure to create a reservation for this address and match it to the relevant computer see Static DHCP Client below. The lease functions just as a lease on an apartment would.

The initial lease designates the amount of time before the lease expires. If the tenant wishes to retain the address when the lease is expired then a new lease is established. If the lease expires and the address is no longer needed than another tenant may use the address.

Related Drivers