Lava Link PCI 1 port RS-232 Driver
LAVA Ether-Serial Links extend serial connections anywhere. Access and control Ether-Serial Link single RS IP-enabled pin RJ serial port, power on pin 10 RS serial-to-IP connection to ST units, 1-DB9F & 1-DB9F & 1-DB9M HQ Plus Dual 9-pin serial, UARTs, for volt PCI. 4 Port Native PCI Express RS Serial Adapter Card with UART . Lava Computer Quattro-PCI/LP 4 Port Multiport Serial Adapter. Figure 4: BlueStorm/Express Opto (1 kV) RS// eight port model .. Telephone: (Live assistance available a.m. to p.m. EST, The Connect Tech Inc. Lifetime Warranty is defined as the serviceable life of the product. serial card, using legacy application software from your PCI system.
|Supported systems:||Windows XP/Vista/7/8/10, MacOS 10/X|
|Price:||Free* [*Free Registration Required]|
Lava Link PCI 1 port RS-232 Driver
There are four LEDs that indicate which port is connected to the master port. There is no delay through the device and data is not buffered. The communication format is set via dipswitch 1 SW1 - see datasheet.
PCI Serial Cards
Communication between the devices can use any format or data rate. Power supply required, not included, sold separately. For example, two computers can share the same modem or serial printer at the same time and each can remain connected at all times. The other pins must be programmed for proper direction of data flow. Model UDS can function as either an modem data splitter or a printer data splitter.
Serial Converters, Isolators and Repeaters - Advantech
This unit is self-powered from the RS line and can be left permanently installed. Find out with this RS mini tester. It makes troubleshooting easy by helping to check interface connections, equipment, cable problems or failures. The tester may be left in the line permanently. It is transparent to data transfer.
Bright red or green LED signals clearly show which lines are active. Economizes systems by connecting a PC port to several data sources — ideal for devices requiring only intermittent access.
Serial Converters, Isolators and Repeaters
The first device to send captures the data path, locking out other lines. Data flow may also be software controlled using the RTS line. Data from the host PC is sent to all attached devices. Port combiners can be cascaded by connecting the master port of each successive unit to one of the slave ports of the preceding unit.
Each additional port combiner adds one slave port to the system. Many computers, laptops and some desktops ship with low-power versions of RS ports that are unable to drive port-powered devices or full-length RS cabling. It is also ideal for extending full-powered RS cable runs beyond the typical 15 to 30 meters 50 to feet distance.
To continue using , please upgrade your browser.
An external power supply is required not included, sold separately. It offers one optically isolated input and two relay outputs. The Master port can send and receive data from one Slave port while the other Slave ports continue to buffer data.
The Master can also broadcast the same message to two or more Slave ports at once. The switch can also be configured to send data automatically to the Master port from each of the Slave ports when data is present with an optional preamble identifying the port.
LAVA at a glance
It can also provide two-way communications between the Master port and one Slave port at a time. Switching and control is accomplished through user defined three or four character command strings. These control sequences are stripped from the data stream, making the switch transparent to the Slave devices.
Switches can be cascaded to expand the BSS4 to more than four ports. Two units can also be used back-to-back to provide automatic connection between devices over a single data channel.
LEDs indicate when the unit is powered up and which port is selected to send data to the Master port. A 12VDC power supply with a 2. DIP switches set programming to monitor the main Transmit and Receive lines individually or together.
BBCDT Tap in on a serial data stream and transparently feed another monitor, printer or other device. The male RS connector on the top and the female RS connector on the bottom are connected straight through, pin for Lava Link PCI 1 port RS-232. These connectors are used to connect the device — in series — with the RS line to be tapped.