ITRONIX DUO TOUCH-IX325 GPS Driver
Beyond its state-of-the-art hardware solutions, one of General Dynamics Itronix key differentiators is its wireless integration expertise, which. Hi there, Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this Duo-Touch IX Tablet PC touchscreen not working. 's detailed analysis of Itronix's rugged Duo-Touch II All ports are sealed with rubber plugs, and you can get integrated GPS and just.
|Supported systems:||Windows 7/8/10, Windows XP 64-bit, Mac OS X 10.X|
|Price:||Free* [*Free Registration Required]|
ITRONIX DUO TOUCH-IX325 GPS Driver
That is relatively simple for a standard LCD, but much more difficult for displays with touch screens as they add more layers and thus more reflective surfaces.
To reduce reflection, manufacturers use anti-reflective coatings and special polarizers. In conjunction with a strong but not excessively bright so as to significantly reduce battery life backlight, it cuts overall display reflectivity to about 7: Remarkably well unless you have unrealistic expectations. Take the Duo-Touch outdoors on a bright day, and it remains totally readable in the shade.
Go into direct sunlight and it ITRONIX DUO TOUCH-IX325 GPS a bit more difficult as the sun can still reflect in the display surface.
So why not add one of those matte-looking ITRONIX DUO TOUCH-IX325 GPS coatings on top of everything else? Because GD-Itronix found that an anti-glare coating reduced performance and test users felt an anti-glare coated screen was not as sharp. As is, even facing the sun the screen remains readable, though you may have to position it so there is no direct reflection from the sun.
Is the display perfect?
No, and current technology doesn't allow one that is, at least not outdoors. Compared to competing technologies, the DynaVue approach matched or exceeded anything we've seen here at RuggedPCReview. Indoors we noticed a faint horizontal line pattern and grid, and a bit of optical distortion when ITRONIX DUO TOUCH-IX325 GPS the display from an angle.
Rugged PC - Itronix Duo-Touch II
What about the viewing angle? Ever since the BOE Hydis wide viewing angle LCDs became available in Tablet PCs, we've been raving ITRONIX DUO TOUCH-IX325 GPS them as they let you view the screen from any angle without any color shifts or washing out. Well, BOE Hydis does not make an 8. The one GD-Itronix uses has a perfect neardegree horizontal viewing angle, but a much narrower one when you tilt the unit vertically.
That means you have to hold the computer at a proper angle to avoid color shifts. This would be an issue in a notebook, but much less so in a tablet that can easily be positioned for best possible viewing.
Brightness adjustment is either automatic or via buttons. The manual mode isn't immediately obvious: You use Function and the "rotate" key to increase brightness, and Function and the "security" key to decrease it. In automatic mode there is the very handy control panel shown to the left.
It lets you set backlight brightness levels in response to ambient lighting conditions as measured by the computer's light sensor that sits on the right side of the screen just above the control buttons. The light sensor measures light in lux.
- I have an Itronix Duo-touch computer and the screen is in - Fixya
- General Dynamics Itronix Duo-Touch II GB, Wi-Fi, in - Black eBay
- General Dynamics Itronix Duo-Touch II 160GB, Wi-Fi, 8.4in - Black
- Add Your Answer
Direct sunlight ranges from 30, tolux. Outdoors in the shade you may encounter a few hundred to a couple of thousand lux.
Indoors, you may have as little as 30 lux or as much as under a bright reading lamp. The panel lets you set automatic brightness for four ranges.
Itronix IX325 Disassembly documentation and photos
When the sensor detects a different lighting environment, it waits a few seconds, then ITRONIX DUO TOUCH-IX325 GPS brightness in steps. Even if you set the brightness to maximum for all levels, it's educational to watch the lux readout. You learn something about lighting intensity. The same utility also lets you assign alternate functions to each of the hardware buttons to the right of the LCD.
It can work as an active digitizer as required for the full Windows XP Tablet PC Edition and ITRONIX DUO TOUCH-IX325 GPS pen functionality, but it can also work as a passive touch panel. In active mode it provides cursor tracking, ITRONIX DUO TOUCH-IX325 GPS mouse-click emulation pressing and holding the pen until the right mouseclick menu pops up and all the other neat tricks an active digitizer can do. In passive touchscreen mode it works like a PDA and you can use any stylus or finger to tap the display.
In touchscreen mode, the digitizer is responsive, but also offers excellent palm rejection. Palm rejection refers to the digitizer's resistance to making the cursor jump when you inadvertently touch the screen with the palm of your hand. To toggle between the two modes, you press the left and right buttons at the same time.
This, again, is not obvious, but once you figured it out, you won't forget. The dual-mode digitizer definitely adds flexibility to the machine. When doing standard Windows chores, the digitizer ITRONIX DUO TOUCH-IX325 GPS works best, but some custom software applications may be designed for mobile use and you simply use your fingers to operate it. The touch screen can be calibrated ITRONIX DUO TOUCH-IX325 GPS configured via a special and quite extensive control panel.
Spend some time with it to optimize the touch screen to your personal preferences.